Caller-id function (clip), Register/de-register a handset – Topcom BUTLER 2950 User Manual
Page 69
Topcom Butler 2950
69
Topcom Butler 2950
ENGLISH
6. CALLER-ID FUNCTION (CLIP)
The Topcom B2950 displays the telephone numbers of incoming calls. This function is only possible if you are
subscribed to a telephone operator that provides this service. Contact your telephone provider for more information.
When you receive a call, the numbers are saved in a Call list. This list can hold 20 telephone numbers (each of max.
25 digits). If the number is longer then 14 digits, you can press the
key to show the other digits!
6.1 NEW CALLS
When you’ve received a new unanswered call, the CLIP symbol
will blink on the display.
6.2 CONSULTING THE CALL LIST
•
Press the Call Log button
. The last received call is shown on the display. If the list is empty, ‘NO CLIP’ is shown
on the display.
•
The following will be shown on the display:
•
After 5 seconds, the telephone number will be shown. You can skip the date/time by pressing the
button.
•
Use the left scroll key
to scroll to the previous call. Use the
button to show the next call.
•
You can leave the Call list by pressing the
button.
* ONLY WHEN THE NETWORK SENDS THE TIME/DATE TOGETHER WITH THE TELEPHONE NUMBER!!! On
some networks with caller ID, time and date will not be displayed
6.3 CALLING A NUMBER FROM THE CALL LIST
•
Scroll through the Call list until the desired number is shown on the display.
•
Press the Line button
. The number will be dialled automatically.
6.4 ERASING A NUMBER FROM THE CALL LIST
•
Scroll through the Call list until the desired number is shown on the display.
•
Press and hold the Mute button
for 3 sec. to erase the number.
6.5 STORE A NUMBER FROM THE CALL LOG INTO THE MEMORY
•
Scroll through the Call list until the desired number is shown on the display.
•
Press and hold the Memory button
for 3 sec.
•
Enter the memory location (0-9) where you want to store the number
•
Enter the Memory button
again to confirm and to go back to standby
7. REGISTER/DE-REGISTER A HANDSET
7.1 REGISTER TO A TOPCOM B2950 BASE
You can subscribe 5 handsets to one base unit. By default, each handset is subscribed as handset 1 on the base unit
upon delivery (base unit 1).
!!! You only need to subscribe the handset if: !!!
•
The handset subscription has been removed from the base unit (e.g. for reinitialisation)
•
You want to subscribe a different handset to this base unit.
Date (DD-MM) *
Progress number
Time (24h format) *