Traulsen RBC100 EN - Manual (Page 3)

1. From the Main Menu Screen press MORE, then
SETUP. The display will change to the Password
Screen.
2. From the Select Supervisor Screen, use the UP and
DOWN arrows to the left and right of PASSWORD to
select 57. Press ENTER. The display will change to
the Set Up Screen.
3. From the Set Up Screen press the button to the right
of SYSPAR.
4. The ITEM list will display date and time elements in
the following order.
a) MONTH (JANUARY – DECEMBER)
b) DATE (1 – 31
1 )
c) YEAR (2003 – 2079)
d) DAY OF WEEK (SUNDAY – SATURDAY)
e) HOUR (0 – 23)
f)
MINUTE (0 – 59)
g) DLS - Daylight Savings TIme (ENABLED – DISABLED)
e) LOW ALARM (-30 – 0)
5. Press the button to the left of ITEM to select between
the different items. Adjust the VALUE for each ITEM
using the UP and DOWN buttons.
6. Press ENTER to return to the MAIN MENU.
2
Programming the Control
How to Set Correct Date & Time
SYS PAR: SET CLOCK
ITEM:MONTH
VALUE:APRIL
CANCEL ENTER
SYS PAR: SET CLOCK
ITEM:MONTH
VALUE: APRIL
CANCEL ENTER
MAIN MENU AIR 35 ° F
BY TEMP BY PROD
BY TIME
08:05:01 MORE
MAIN MENU 08:06:01
HOLD PROD PRINT
DEFROST
SETUP
BACK
SYS PAR: SET CLOCK
ITEM:YEAR
VALUE:04/14/10
CANCEL ENTER