Technicolor - Thomson LDK 4502 - Manual (Page 13)

Installation User's Guide LDK 4502 - HDTV Camera Base Station 2-5
15-pin female, shielded cable
1. Prod. out (4-wire out, 2-wire in/out)
2. Prod. in (4-wire only)
3. Prod. in shield (4-wire only)
4. ENG in (4-wire only)
5. ENG out (4-wire out, 2-wire in/out)
6. Progr. in (4-wire only)
7. Progr. in shield (4-wire only)
8. Housing
9. prod. out return (4-wire out, 2-wire in/out)
10. prod. in return (4-wire only)
11. ENG in shield (4-wire only)
12. ENG in return (4-wire only)
13. ENG out return (4-wire out, 2-wire in/out)
14. Progr. in return (4-wire only)
15. Housing
Shield of cable to the pin marked housing.
4-wire:
Output signals: level +6dBu or 0dBu selectable output
impedance 50 ohm (max), symmetrical
Input signals: level +6dBu or 0dBu selectable
impedance 9 Kohm (min), symmetrical
2-wire: level 0dBu
load impedance: 200 ohm
maximum DC level = 40 V
X374 15-pin female
Panel part number 2411 022 06239
Cable part number 2411 022 05168
Intercom Connector (I/Com) - Panel View
2 - Wire configuration
Housing
ENG in/out
PROD in/out
0dB
Z=200 ohm
Max 40V DC
15
8
9
1
(+)
(-)
(+)
(-)
(+) (-)
4 - Wire configuration
Housing
PROG in
ENG in
PROD in
+6 dB or 0dB
Zin > 9 k ohms
ENG out
PROD out
+6dB or 0dB
Zout < 50 ohms
15
8
9
1
15
8
1
9