Tektronix CSA8000B User Manual
Page 205
Data Input and Output
CSA8000B & TDS8000B User Manual
3- 131
Overview
Control elements & resources
To use exported waveforms (cont.)
Specify a
line-graph
chart
7.
From the Chart Wizard, make sure Built In is checked.
Then select the either Lines in the Standards Types
tab or Smooth lines in the Custom Types tab. (See
illustration at right.)
Finish the
chart
8.
Click Next to step through the next two steps
accepting the defaults settings at each step. Click the
Finish button in step 4. You should have a waveform
display similar to that show right.
Tip. This procedure assumes MS Excel 97. You can
likely specify titles, customize the treatment and
labeling of the x and y axes, etc. in your data-analysis
application—either as you create the chart or
afterward. Use the help for your data-analysis
application to determine if it has these capabilities
and for instructions in using them.
For more
information
9.
For more help on exporting waveforms., press the
Help button in the dialog box to access contextual
online help.
See page 3--167 to learn about accessing online help.
End of Procedure