Tektronix CSA8000B - Manual (Page 70)

2- 8 CSA8000B & TDS8000B User Manual
Front Panel Map -- Quick Access to Most Often Used Features
Press to display and select a waveform not yet displayed;
press to select among displayed waveforms;
press again to turn a selected waveform off.
Button lights indicate displayed and selected waveforms.
Page 3--62.
Select a waveform type, Channel,
Reference, or Math, to display or adjust on
screen (selected button lights). Page 3--62.
Press to display the cluster of Setup Dialogs
for comprehensive set up of the instrument.
Press to toggle the touch screen on and off. Use the
touch screen to control UI when you haven’t installed a
mouse. Page 3--60.
Press to access print dialog for
printing the display. Page 3--131.
Press to automatically set up the instrument controls
based on selected channels. Page 3--11.
Press to quickly return to instrument-default
control settings. Page 3--13.
Turn knobs to vertically scale, position, and
offset selected waveform. Page 3--8.
Press to display and select a time base view not
selected, or to select among displayed views;
press selected timebase again to toggle it off
(except Main which is always on). Page 3--64.
Turn knobs to Horizontally scale, position,
and set record length of selected waveform.
Page 3--10.
Press to start and stop acquisition or clear
all channel waveforms at once. Page 3--26.
Press a Menu button to quickly access the setup dialog for
its control group for more detailed set up.
Use controls to set trigger level and lights
to monitor trigger state. Page 3--48.
Turn knob to adjust most control fields in setup dialogs.
Press the Select button to switch among fields. Press the
Fine button to toggle between normal and fine adjustment.
Press to display measurement cursors and set the knob
and Fine (adjust) and Select buttons to control them.
Page 3-- 89.