Teac R4-INT - Manual (Page 16)

16 16
AUX in
Listening to an External Source
In addition to connecting other audio devices, you can use the
AUDIO IN to listen to an iPod that has no dock connector or when
an appropriate Dock adapter is not available.
1
Connect the PHONES jack or audio output jack of a
portable audio player to the AUDIO IN jack of the
R-4iNT using the supplied stereo mini-plug cable.
AUDIO IN
2
Press the MODE button repeatedly to select “Aux in”.
Aux in
< You can also use the FUNCTION button ( ˙ / ¥ ) on the remote
control unit to select “Aux in”.
3
Play the source, and adjust the volume using the
Volume button ( or ) of the R-4iNT and of the audio
player.
< When using the headphones jack of a device, if you do not
adjust its volume, you might not hear any sound from the
R-4iNT.
< Turning the volume of the connected device up too high
might cause the sound from your R-4iNT to be distorted. In
this case, reduce the volume of the device until the distortion
stops and then adjust the volume level of the R-4iNT to a
comfortable listening level.