Teac R4-INT - Manual (Page 18)

18 18
Before use, insert an appropriate Dock adapter in the Dock.
1
Press the MODE button repeatedly to select “iPod”.
iPod
< You can also use the FUNCTION button ( ˙ / ¥ ) on the remote
control unit to select “iPod”.
2
Insert the iPod/iPhone into the Dock.
3
Press the Play/Pause button (y/J) on the iPod or the
R-4iNT's remote control unit .
The R-4iNT will start playback from the iPod/iPhone’s song list.
< When the iPod/iPhone is inserted while a source other than
iPod mode is selected or while the R-4iNT is in the standby
mode, “iPod attached – Switch to iPod mode?” is displayed.
In this case turn the MULTI JOG to select “YES”, and then press
the SELECT button.
< In iPod mode, if an iPod/iPhone that is in playback mode is
inserted into the dock, the R-4iNT will automatically start
playback from the iPod/iPhone’s song list.
< Make sure to use an appropriate Dock adapter (see previous
page).
< The battery of the iPod/iPhone is recharged to the full
whenever the iPod/iPhone is docked and the R-4iNT is
connected to the AC line.
< If headphones are also plugged into the iPod/iPhone, sound
comes from both the headphones and the R-4iNT speakers.
Stopping playback temporarily
(Pause mode)
During playback, press the Play/Pause button (G/J). Playback
stops at the current position.
To resume playback, press the Play/Pause button (G/J) again.
< You can also use the button on the iPod/iPhone to pause
playback.
Skipping to an earlier or later song
During playback, press the Skip buttons (.//) repeatedly
until you find the desired song. The selected song will be played
from the beginning.
< If the . button is pressed once during playback, the song
currently being played will be played from the beginning. To
return to the beginning of the previous song, press the .
button twice.
Searching for a part of a song
Hold down
During playback, hold down the Search button (. or /) to
search a part of a song.
Release it when you find the part you want to hear.
Listening to an iPod/iPhone (1)
iPod/iPhone