TOA Electronics CP-66 - Manual (Page 108)

CB interface
1. Making outgoing telephone calls from the intercom
station
(1) If the CB-600 is connected to PBX extension lines.
ing a dial tone from the PBX, dial (dialing for
external calling) to gain access to the telephone
line. Then, dial the desired telephone number.
(2) If the CB-600 is connected directly to a telephone
line.
Dial (CB interface access No.) to gain access
to the telephone line. Then, dial the desired tele-
phone number.
(Note 1)
It is possible to dial a call with the handset
replaced. As soon as the called party answers
the call, lift the handset and begin conversation.
(Note 2)
When registering the telephone numbers into the
auto-dialer (HF-660M or AK-024) or for single
digit dialing, press
(pause key) immediately
after (CB access No.).
2. Picking up on incoming telephone call from the inter-
com station when CB-600 lines are directly connected
to the telephone line.
When you hear the telephone ringing tone (ringing tone
from an external speaker, or a short intermittent calling
tone from the station speaker), lift the handset and dial
(access No. for call pickup) at any station within
the called group. You can then answer the call.
3. Other functions of CB interface
(1) Connection of the pager interface to the CB-600
lines allows a pager with both voice call and indica-
tion functions to be called. (For details, refer to
the section on pager call and response.)
Specified No.
Outgoing telephone call
initiation No.
Ringing tone
External ringer
Specified No.
—101—
Dial (CB interface access No.). After confirm-