Toshiba GD-1170 - Manual (Page 103)

101
5
5 Press the [CONFIDENTIAL] (or [BULLETIN BD.] or [RELAY]) button,
and then press the [TRANSMIT] button.
6 Press the [ENTER] button.
7 Press the [BOX NUMBER] button to enter the next menu, key in the
box number(s) (maximum 20 digits), and then press the [ENTER] but-
ton.
• If a password has been set, press the [PASSWORD] button to enter the next menu, key in the password (max-
imum 20 digits) and then press the [ENTER] button.
A password entry is necessary for the data transmission of a bulletin board mailbox.
8 Press the [ENTER] button.
9 Specify the remote Fax
• Entering the Fax number ( P.37 “Direct entry with digital keys”)
• Selecting from address book ( P.38 “Address book entry”)
• Selecting by group registration ( P.39 “Group entry”)
• Selecting using multi-address transmission ( P.47 “Multi-address transmission”)
10 Press the [START] button.
• The original data is transmitted to the remote mailbox after it is scanned to memory.
• If you want to cancel the transmission during scanning, press the [STOP] button and then press the [JOB CAN-
CEL] button.
• If you want to cancel the transmission while underway, press [JOB STATUS], [FAX], select the correct entry,
and press [DELETE].
P.75 “Canceling transmissions (during memory transmission)”
• The registered box number will be transmitted a SUB address.
• The registered password will be transmitted a SID.