Memory transmission – Toshiba GD-1170 User Manual
Page 53
51
2
Memory transmission
In the memory transmission mode, originals are scanned at high speed and temporarily stored in memory
before transmitting.
•
Up to 100 transmissions can be reserved.
•
Up to 1000 pages can be stored in 1 transmission.
•
You can specify two or more remote Faxes at one time.
•
If the original cannot be sent (the remote Fax is busy or otherwise unavailable), the remote Fax is auto-
matically redialed repeatedly.
•
If memory becomes full midway during scanning, the message "Will you enable stored originals?"
appears. Press the [YES] button to send the originals which have been scanned. Press the [NO] button
to delete the scanned originals. In this case, reduce the number of originals you are sending, or try
sending in the direct transmission mode. ( P.49 “Direct transmission”)
•
If an original is placed on the original glass, the scanning conditions can be changed for each page.
( P.35 “Setting the scanning conditions for each page”)
1
Place the original(s).
2
Press the [FAX] button on the control panel.
3
Press the [ADDRESS] button to enter the address menu, and then
press the [OPTION] button.
4
Press the [MEMORY TX] button, set the other transmission condi-
tions, then press the [ENTER] button.