Toshiba GD-1170 - Manual (Page 160)

158 7.REGISTERING AND SETTING ITEMS
7
4. Setting RX Printing
Setting RX printing
Set print settings for originals received on the Fax that are to be printed. 2 print installations are available:
discard printing and RX reduction printing.
•
Discard Printing
ON (default setting):
When originals are up to 10 mm larger than the printing area; the part of the originals that extends
beyond the paper printing area is discarded.
OFF:
The received original is printed on 2 sheets of paper if its length exceeds the paper printing area.
*
For the detail of DISCARD setting, contact your service technician.
• RX reduction printing
ON (default setting):
If the received original is longer than the recording paper, it will be vertically reduced to 90%* to fit on
the installed receiving paper.
*
LG size original is vertically reduced to 75% to fit on LT or LT-R paper.
OFF:
The received original is printed on 2 sheets of paper if its length exceeds the paper printing area.
*
Drawers can be set for received Fax printing only. See the [Operator’s Manual for Basic Function].
Be sure to use LD, LG, LT, LT-R, A3, A4, A4-R or B4.
For the relationship between the received original and the output paper, see P.62 “3.Relationship
between Original and Paper”.
1 Press the [USER FUNCTIONS] button on the control panel.
2 Press the [ADMIN] button and then the [PASSWORD] button.