Installing and using the software, Trimble gps monitor – Trimble Outdoors THUNDERBOLT 64057-00-ENG User Manual
Page 17
Trimble ThunderBolt E GPS Disciplined Clock User Guide
15
Setting up and Running the ThunderBolt E
2
Installing and using the software
All software programs for the ThunderBolt E are available online from the Trimble
website at
www.trimble.com/timing.shtml.
These programs enable you to monitor the
ThunderBolt E and change its configuration settings.
B
Tip – Install and set up the monitor program before turning on the ThunderBolt E—this
allows you to observe the timing process, from start up to fully functioning.
Trimble GPS Monitor
C
CAUTION – Use only the Trimble GPS Monitor software with this product. Previous
versions may not be compatible.
To install the Trimble GPS Monitor (TrimbleMon) application from the website:
1.
Go to
http://www.trimble.com/TrimbleMon.shtml
and then select
Support /ThunderBolt E Software Downloads /Installation Files.
2.
Click Trimble Monitor Program and then download the Trimble_Mon.exe file to
the computer’s hard drive.
3.
To run the application, double-click the file. The Trimble GPS Monitor screen
appears:
Tx and Rx indicators
COM port and settings