Toshiba GA-1120 - Manual (Page 16)

14
3 Select whether printing MS-DOS-based
programs and click on [Next].
1 Open the GA-1120/GA-1130 printer in the
Network Neighborhood with the Windows
Explorer, and double-click on a queue.
• Select a queue depending on how you want to print.
direct - print jobs are sent straight to the printer
without spooling.
hold - print jobs are held until users operate copying
or moving them to the Print queue with the job
management tools.
print - print jobs are spooled to the hard disk in the
GA-1120/GA-1130 printer and printed out. Use this
queue for general printing.
• The Printers screen appears.
The procedure here describes an installation on Windows 98. The procedures are the same when
other versions of Windows are used.
2 Click on [Yes].
• When installing to Windows 95, Windows 98, or
Windows Me, the Add Printer Wizard screen appears.
Continue to next step.
• When installing to Windows NT 4.0, the printer is
installed and the print queue screen appears.
Continue to Step 7.
Point-and-Print Installation