Toshiba GA-1120 - Manual (Page 54)

52
Configuring the Options Automatically
When the GA-1120/GA-1130 printer and your computer is connected in the TCP/IP network, you can
configure the options automatically obtaining the settings using Two-Way Communication.
1 Select the printer driver in the Printers folder.
Then click on [File] and select [Properties].
• When you are operating on Windows XP, open the
Printers and Faxes folder to access to the printer
driver.
• The printer driver properties screen appears.
2 Display the [Configuration] tab, check “Two-
Way Communication” and enter the IP address
or DNS Name in the “Printer IP Address or
DNS Name” field. Then click on [Update].
• When you installed the printer driver for SMB printing,
“Two-Way Communication” has been checked on and
the DNS Name has entered in the “Printer IP Address
or DNS Name” field.
• When you are operating on Windows NT 4.0,
Windows 2000 or Windows XP, the Attention
message is displayed after clicking on [Update]. In
this case, click on [OK] to close the message and
confirm the option settings are correctly configured on
the [Device Settings] tab.
3 Click on [OK] to save settings.