Toshiba GA-1120 - Manual (Page 50)

48
2 hole Punch Unit
Add this when 2 Hole Punch Unit (MJ-6002E) is installed. This can be added only when
“Finisher with Saddle Stitcher” or “Finisher with Stapler” has been already added into the
“Installed Options” list.
2/3 hole Punch Unit
Add this when 2/3 Hole Punch Unit (MJ-6002N) is installed. This can be added only when
“Finisher with Saddle Stitcher” or “Finisher with Stapler” has been already added into the
“Installed Options” list.
4 hole Punch Unit (F)
Add this when 4 Hole Punch Unit (F) (MJ-6002F) is installed. This can be added only when
“Finisher with Saddle Stitcher” or “Finisher with Stapler” has been already added into the
“Installed Options” list.
4 hole Punch Unit (S)
Add this when 4 Hole Punch Unit (S) (MJ-6002S) is installed. This can be added only when
“Finisher with Saddle Stitcher” or “Finisher with Stapler” has been already added into the
“Installed Options” list.
Color-MFP-ADU
Add this when the Automatic Duplexing Unit (MD-5007) is installed.
Finisher with Saddle Stitcher
Add this when the Saddle Stitch Finisher (MJ-1020) is installed.
Finisher with Stapler
Add this when the Stapler Finisher (MJ-1019) is installed.
Large Capacity Feeder
Add this when the Large Capacity Feeder (MP-1503LT or MP-1503A4) is installed.
2 Display the [Configuration] tab, select the
option under “Available Options” and click on
[Add].
• Added options are displayed in the “Installed Options”
list. Repeat the operation to add all options installed
on the machine.