Toshiba FT-8801A - Manual (Page 19)

BASIC OPERATION
19
Basics
TONE/PAUSE
INTERFERENCE OR STATIC
If you hear noise during a call, press to
select another channel. The LCD displays
“Scanning” while changing a channel.
PAGING THE HANDSET
1
To locate the handset while it is off the base,
press
. The handset beeps for 60
seconds.
To stop paging, press or any key at the handset, or
return the handset to the base unit.
NOTE:
You cannot page the handset during a call.
PAGE
PAGE
CH
Paging
Talk 0:15
Scanning
9 0 0 M Hz
PAGE
Basics
To
To temporarily switch to tone dial
(When the base is set to pulse mode),
see page 14
To enter a pause within the dialing sequence
Do this
Press . The following numbers will
be sent as tone dialing.
Press . “P” appears in the display
which represents a pause.
PAUSE
TONE/
FT-8801A.qxd 7/13/1 10:40 AM Page 19