Toshiba FT-8801A - Manual (Page 31)

31
Caller ID/Call waiting
CALLER ID/CALL WAITING
DELETE ALL CALLER ID DATA:
1
Press .
2
Press .
Press or to
select Yes or No.
3
Press or .
If you select , a confirmation tone
sounds and the LCD displays “Total:00”.
If you select , the LCD displays the
number of Caller ID calls.
4
Press to return to the standby mode.
CALL WAITING
The LCD will show another incoming call even if you are on the line.
This feature can be enabled or disabled. If enabled, you hear the
short beeps at regular intervals until the call is either answered, or the
person calling hangs up. With Caller ID on call waiting, you can see
who is calling to decide if you want to interrupt your current
conversation to answer the incoming call.
WITH CALLER ID SERVICE
1
Before answering a call, check to see that the caller’s name
and telephone number are displayed on the screen. To
switch to the waiting call, press
on the handset. The
first caller is put on hold.
2
To switch back to the first caller, press again.
NOTE:
Pressing without having received a Call Waiting signal may
disconnect the current line.
FLASH
FLASH
FLASH
CID
DELETE SELECT
DELETE
CID
New :01
Total:02
Delete All?
Yes
s sNo
Total:00
New :01
Total:02
FT-8801A.qxd 7/13/1 10:41 AM Page 31