Troy-Bilt 769-03618 - Manual (Page 19)

Prevent the inner jam nut from turning and tighten the
outer jam nut against the bracket. Prevent the outer jam
nut from turning and tighten the inner jam nut against the
bracket.
Measure the gap by repeating Step 3. Readjust as needed
by repeating Steps 5 and 6.
Reinstall the belt cover.
Off-Season Storage
When the tiller won’t be used for an extended period, prepare it
for storage as follows:
Clean the tiller and engine.
Do routine tiller lubrication and check for loose parts and
hardware.
Protect the engine and perform recommended engine
maintenance by following the storage instructions found
in the Engine Operator’s Manual. Be sure to protect the
fuel lines, carburetor and fuel tank from gum deposits
by removing fuel or by treating fuel with a fuel stabilizer
(follow the engine manufacturer’s recommendations).
Store the tiller in a clean, dry area.
Never store the tiller with fuel in the fuel tank in an
enclosed area where gas fumes could reach an open flame
or spark, or where ignition sources are present (space
heaters, hot water heaters, furnaces, etc.).
6.
7.
8.
1.
2.
3.
4.
5.
19 s
ectiOn
6 — M
aintenance
& a
djustMents