Topcom CALLMASTER 220 - Manual (Page 18)

Callmaster 220
18
- Press the Program/Call button to confirm the number.
- “ENTER NAME” will appear on the display. Enter the name by using
the Up and Down buttons to select the characters. Use the
Record button to move the cursor to the right, and the Erase
button Ø to delete the last number and move the cursor to the left!
- Press the Program/Call button to confirm the name. The name
and number will be stored into the Phone Book.
- “RECORD NAME” will appear on the display. Press and hold the
Record button until you hear the signal. When the memory is
full, you will hear two beep sounds!
- You have 2 seconds to record the name that belongs to that
number.
Note: The name and number will always be stored into the Phone Book!
5.1.2 Record a name to an entry in the Call List
- Select the desired number from the Call List.
- As soon as the number appears on the display, press and hold the
Record button until you hear the signal. When the memory is
full, you will hear two beep sounds!
- You have 2 seconds to record the name that belongs to the number.
Note: The Call List entry to which you have recorded a name will always be
stored into the Phone Book!
5.1.3 Record a name to an entry in the Phone Book
- Press the Program/Call button once and you will see “PHONE
BOOK” on the display.
- Press the Up and Down buttons to search a number.
- As soon as the number appears on the display, press and hold the
Record button until you hear the signal. When the memory is
full, you will hear two beep sounds!
- You have 2 seconds to record the name that belongs to the number.
HANDL CALLM 220_SCAN 13/3/02 4:42 pm Page 18