Topcom CALLMASTER 220 - Manual (Page 21)

6.5 Erasing the special outgoing message ( -OGM)
• Press the Program/call button until REVIEW OGM appears on
the display.
• Press the Up or Down button to select the desired number.
• Press the Erase button Ø twice to erase the link with the number on
the display.
Note: Press and hold the Erase button Ø for 2 seconds to erase all links with the
special outgoing message.
6.6 Activating/deactivating the general outgoing message
• Press the Program/call button until the status of the OGM
appears on the display OGM [X] or OGM [V].
• Press the Up/ Down button to enable or disable the OGM.
7. Setting the internal voice volume
You can adjust the volume of the internal voice. There are
3 possibilities : off, low, and high.
Set the switch at the back of the unit in the desired position!
8. Voice mail
!!! This function only works if your telephone company sends the Voice
Mail signals together with the Caller ID information !!!
When the Callmaster 220 has received voice mail messages, the Voice
Mail symbol (
) appears on the display.
Callmaster 220
21
ENGLISH
HANDL CALLM 220_SCAN 13/3/02 4:42 pm Page 21