Tektronix Phasershare Printer - Manual (Page 20)

2
Connecting Your Printer to a Network
14 PhaserShare Networking
5. Select the desired Frame Routing: Transparent or Source Route :
a. Press until the Frame Routing choice you want is displayed.
b. Press Select to enter your choice into the printer; the front panel
briefly displays Selected , then displays the selected Frame
Routing choice again.
6. Return the printer to normal operation:
a. Press until the front panel displays:
Network Settings
Token Ring Menu
b. Press again.
■
If you have changed any parameters that require a printer reset to
take effect, you will be prompted to reset the printer. If you press
Confirm , the printer resets. To return to normal operation without
resetting the printer, press ; Printer Menu appears on the
top line of the display. Press again; the printer returns to
normal operation, but the changes you have made will not take
effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer
reset, press
again; the front panel displays Ready .