Tektronix Phasershare Printer - Manual (Page 36)

4
Novell NetWare Configuration
30 PhaserShare Networking
3. Enable or disable the frame type:
a. Press until the frame type you want is displayed.
b. Press Menu to display the current status of the frame type: On or Off.
c. Press until the frame type is either On or Off , as desired.
d. Press Select to enter your choice into the printer. The front panel
briefly displays Selected , then returns to the display of the frame
type name.
e. Press to return to the menu of frame types.
4. You can set more than one frame type; to set other frame types, repeat
Step 3.
5. Return the printer to normal operation:
a. Press until Network Settings appears on the top line of the
display.
b. Press again.
■
If you have changed any parameters that require a printer reset to
take effect, you will be prompted to reset the printer. If you press
Confirm , the printer resets. To return to normal operation without
resetting the printer, press ; Printer Menu appears on the
top line of the display. Press again; the printer returns to
normal operation, but the changes you have made will not take
effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer
reset, press
again; the front panel displays Ready .