Tektronix Phasershare Printer User Manual
Page 61
Setting the Printer’s IP Addressing Parameters
8
Setup Guide
55
8.
Return the printer to normal operation.
a.
Press
until the front panel displays
Network Settings
.
b.
Press
again.
■
If you have changed any parameters that require a printer reset
to take effect, you will be prompted to reset the printer. If you
press
Reset
, the printer resets. If you press
Resume
, the front
panel displays
Network Settings
. Press
; the printer
returns to normal operation, but the changes you have made
will not take effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer
reset to take effect, the front panel displays
Ready
.
Setting IP parameters: Phaser 780 printer front panel
N
O
T
E
When you set the IP addressing parameters from the front panel, the front
panel selections for DHCP/BOOTP and RARP are automatically set to
Disabled.
1.
While
Ready
is displayed, press
Select
; the
Printer
menu is
displayed:
Printer Menu
Help Pages Menu
2.
Press
or
until the front panel displays
Network
Settings
.
Printer Menu
Network Settings Menu
3.
Press
Menu
to enter the
Network Settings
menu;
Network
Settings
appears on the top line of the display
.
4.
If TCP/IP is not already displayed, press
until the front panel
displays
TCP/IP
.
5.
To set the IP address:
a.
Press
Menu
again; the front panel displays
Interface
.
b.
Press
until the front panel displays
IP Address
.