True Fitness 750EA - Manual (Page 50)

emoval & Replacement 750E & 750EA
Remove Hub Assemblies
Step 1.
Use elliptical wrench or pliers to
Remove large hex nuts holding hub
Assembly in place.
Step 2.
Remove retainer clip with flat-blade
Screwdriver
To remove wheel from frame, slip
Shaft through bearing.
Step 3.
Pull wheel and hub assembly out as
A unit. Bearings and axle cannot be
Field serviced.
Copyright 2001 True Fitness Technology, Inc.
Page 48
Step 2. Remove Clip.
Step 1. Remove Large Hex Nut.
Step 3. Pull Assembly Out.
Tools Required:
Elliptical Wrench (pn: 90361501)
Channel Lock Pliers
Flat Blade Screwdriver