Texas Instruments SLOU023A - Manual (Page 8)

Features
1-2 Introduction
1.1 Features
The TI TPA112 MSOP audio amplifier evaluation module and the TI
plug-n-play audio amplifier evaluation platform include the following features:
- TPA112 MSOP Stereo Audio Power Amplifier Evaluation Module
J Dual channel, single-ended operation
J 150-mW output power per channel into 8
Ω
at 5 V
J 2.5-V to 5.5-V operation
J Distortion — THD+N is less than 0.01% @ 1 kHz and less than 0.02%
from 20 Hz to 20 kHz into 10-k
Ω
loads; less than 0.06% @ 1 kHz and
less than 1% from 20 Hz to 20 kHz into 32-
Ω
loads; and less than 0.1%
@ 1 kHz and less than 2% from 20 Hz to 20 kHz into 8-
Ω
loads
J Internal thermal and short-circuit protection
- Quick and Easy Configuration With the TI Plug-N-Play Audio Amplifier
Evaluation Platform
J Evaluation module is designed to simply plug into the platform,
automatically making all signal, control, and power connections
J Platform provides flexible power options
J Jumpers on the platform select power and module control options
J Switches on the platform route signals
J Platform provides quick and easy audio input and output connections
- Platform Power Options
J Onboard 9-V battery
J External 5-V – 15-V (V
CC
) supply inputs
J External regulated V
DD
supply input
J Socket for onboard 5-V V
DD
voltage regulator EVM
J Onboard overvoltage and reverse polarity power protection
- Platform Audio Input and Output Connections
J Left and right RCA phono jack inputs
J Miniature stereo phone jack input
J Left and right RCA phono jack outputs
J Left and right compression speaker terminal outputs
J Miniature stereo headphone jack output