Toshiba LF516 - Manual (Page 57)

56
6 F 8 A 0 9 3 4
Switch operation Display example Description
Pushing shows a message to confirm
the setting is OK or not.
If OK, push . If you need to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.
When you push to “SET OK?”
message, the set value is fixed.
Then pushing brings you back to the
setting menu. If you push , you can
change the current value from 0.2150A
again.
Note: The setting range of excitation current value is from 0.0000A to 0.3200A.
If you try to set an exciting current value larger than 0.3200A, an error message appears
and the setting value returns to the previous value.
8.2.3 Meter Size
Proceed as follows to check the meter size of the detector.
Switch operation Display example Description
Select "SIZE" from the setting item
selection menu.
The currently set meter size (50mm in this
example) appears.
Then push .
Pushing returns you to the setting
menu.