Toshiba LF516 - Manual (Page 68)

67
6 F 8 A 0 9 3 4
● Range hysteresis
The hysteresis is the dead band used when multiple ranges are switched.
You can set the hysteresis within the range of 0 to 25% in increments of 0.1%.
The hysteresis is set only when automatic selection of multiple ranges is used.
● Setting sequence of span (range)
The following is the setting sequence for span (range).
Note: If any type of multiple ranges is selected as range type, the setting screens of Range 1
to Hysteresis forcefully appears one after another. If the setting is cancelled halfway, all
of the settings including the ones already set will be cancelled.
You can check or change each constant as described below.
● Checking each constant
Switch operation Display example Description
Select "R1" from the setting item selection
menu.
The currently set span value of Range 1
appears.
Item selection for span (range) setting
:Range type setting
:Range 1 span and unit setting
: Range 2 span
: Range 3 span
4 : Range 4 span
: Hysteresis setting