Toshiba Strata AirLink Integrated Wireless Handset - Manual (Page 51)

Digital Features
Call Forward (CF)
Strata AirLink Integrated Wireless Handset 5/99
39
€ CF–No Answer forwards all calls if you fail to answer within a designated time
(set by you when you enable the feature).
€ CF–Busy/No Answer forwards all calls immediately whenever you are busy, in
the DND mode, or after ringing and you do not answer the call within a
designated time (set by you when you enable the feature).
€ CF–Fixed forwards all internal, private, or DID CO line calls immediately to a
station or voice mail device set in system programming. Your station does not
ring when called and must be assigned with
#&DOO#)RUZDUG#WR= ( )&1 + [B]) in
system programming.
€ CF–External forwards new incoming calls directed to your [PDN] to a
destination outside of the system. [PhDNs] assigned to your handset do not call
forward to external destinations. Internal calls and transferred calls to your
[PDN] also do not forward to external destinations.
Only incoming calls over CO lines dedicated to immediately ring your [PDN],
the private CO
/LQH ( )&1 +[B]), and/or DID line, CF externally. Any of the
other CF modes can be set for your [PDNs] or [PhDNs] simultaneously with
CF–External.
Using Call Forward Buttons
If your digital handset has been programmed for CF buttons ( )&1 + [B]), you can
set the following CF features for a [PDN]: &DOO#)UZG#$OO#&DOOV , &DOO#)UZG#
%XV\ , &DOO#)UZG#1R#$QVZHU , &DOO#)UZG#%XV\21$QV , &DOO#)RUZDUG#
([WHUQDO
, and
&DOO#)RUZDUG#WR=#
(CF–Fixed feature).
Using Access Codes
If your handset has not been programmed for CF buttons or you are forwarding a
[PhDN], you must use access codes to set the CF feature.