Toshiba Strata AirLink Integrated Wireless Handset - Manual (Page 78)

Digital Features
Tone/Pulse Dialing
66
Strata AirLink Integrated Wireless Handset 5/99
Tone/Pulse Dialing
With some older COs, calls are made on CO lines that are programmed for rotary
dial pulses. This feature enables you, while on these lines, to switch to tone dial in
order to access remote equipment (such as an answering machine) requiring DTMF
tones.
With ISDN calls, when you press 7RQH#'LDO#6HOHFW ( )&1 + [B]), all of the digits
entered after that point are sent with DTMF tones.
➤ ➤ ➤ ➤ To change Tone Dialing
Two CO Line Connection (Tandem)
➤ ➤ ➤ ➤ To connect two outside lines (using a [DN] button)
1. Access a CO line. Although the CO line is programmed for rotary dial
pulses, access the CO line and dial the telephone
number like any other call described in this user
guide.
2. Dial a telephone
number.
3. While on the call,
press 7RQH#'LDO#
6HOHFW#+)&1 +
[B]).
You can send DTMF tones with your dial pad. The
feature is cancelled when the call is completed.
1. While talking on an
outside call using a
[DN] button, press
)&1 + 5 .
You hear dial tone and the call is put on hold.
2. Dial a CO line access
code and then the
outside telephone
number.
If you receive a busy tone or no answer, press [DN]
to return to the original connection.
See Table 9 on Page 109 —CO Line Access Codes
or ask your System Administrator.