Therma-Stor Products Group TS-261B - Manual (Page 8)

8 www.thermastor.com • [email protected] Toll-Free 1-800-533-7533
Figure 17: Electrical schematic
Figure 16: Twist tabs
Twist
tabs
Remove
one of
these
base
supports
8. Using a pliers, twist the tabs of the base supports to
align with the slots. Remove only one of the base
supports (see below). Spread the base apart slightly
to remove the impeller fan.
9. Remove the four 4 mm machine screws and lock
washers securing the impeller fan.
0. Reverse this procedure to reassemble with the new
impeller fan.