Taser IT-INST-TC-001 - Manual (Page 33)

TASER CAM User Manual
IT-INST-TC-001 Rev: C August 28, 2006 Page: 33 of 37
©2006 TASER International, Inc. All rights reserved.
20. You may submit video and audio records to TASER International by clicking the
Send To TASER link. The TASER CAM software will automatically connect to
TASER.com and submit your selected videos. The system will display your progress
as the file uploads (Figure 25) and finishes uploading (Figure 26).
Figure 25
Figure 26
Note: Files from the TASER CAM should be downloaded to a PC frequently. The TASER
CAM records in a “loop.” Once the memory in the TASER CAM is filled (approximately 1.5
hours of video), the TASER CAM will record new video over the oldest video records.
Downloading Firing Records from a Weapon Using the Previous (Data-Only)
Download Cable
Firing records can be downloaded, stored, and viewed by the TASER CAM PC software
using the previous (data-only) PC download cable. (The previous cable cannot download
audio/video files.)
1. Remove the DPM/XDPM/TASER CAM from the X26.
2. Connect the X26 to the PC.
3. In the main menu, click the Download TASER X26 link.