Taser IT-INST-TC-001 - Manual (Page 34)

TASER CAM User Manual
IT-INST-TC-001 Rev: C August 28, 2006 Page: 34 of 37
©2006 TASER International, Inc. All rights reserved.
4. The TASER CAM Download Wizard will appear and guide the process.
5. Follow the instructions on the screens.
USE AND CARE
Storage
• Do not store the TASER CAM in extreme cold or heat.
• Do not store the TASER CAM where the contacts may become short-circuited.
• Keep the TASER CAM dry.
Cleaning
Lens
Clean any debris, fingerprints, dust, etc. from the lens using a soft cloth such as an
eyeglass lens cloth. Avoid using any synthetic cleaners.
Gold Contacts
Debris on the gold contacts may cause the TASER CAM and/or the X26 to not function
correctly. Clean the contacts using the TASER International recommended cleaning kit.
Battery
The TASER CAM uses a lithium ion polymer rechargeable battery.
• Fully charge the battery before using the TASER CAM for the first time.
• Frequently charge the battery. Do not let the battery capacity go below 20 percent.
• Keep the TASER CAM away from extreme temperatures.
• Do not recharge the battery out of the recommended temperature range of 32 °F to
104 °F (0 °C to 40 °C).
• Battery performance will decrease over time and in lower-temperature environments.
• The lithium ion battery is replaceable at the factory.
• If it takes longer than 5 hours to charge the battery, contact TASER International for
assistance.