Toshiba Magnia Z300 - Manual (Page 205)

Installing Software
NetWare
183
2 As the following menu appears, delete “ADPT160M” with the
<Del> key.
3 Insert the Adaptec Ultra160 NetWare Driver created with the
Toshiba Server Setup Tool in the floppy disk drive.
4 Select “Add an unlisted driver <Ins>” by pressing the <Insert>
key twice.
5 Press the <Enter> key to retrieve drivers contained in the
floppy disk.
The following drivers are added to the screen.
Proceed with installation by following the instructions that appear
on the screen:
Selecting the RAID Controller E2H/F driver
The installer detects the SCSI controller, and the following menu
appears.
Add, edit, or delete storage drivers. Each control-
ler/adapter requires a driver.
Driver name Device name Stat
||Adpt160m.HAM|| Adaptec Ultra160 ASPI & SCSI Module||
||IDETA.HAM || Generic ATA/IDE/ATAPI.Adapter ||
Additional Driver Options
_Return to driver summary
_Modify
||ADPT160M.HAM||Adaptec AIC-7892 Ultra160 SCSI ASIC||