Toshiba Magnia Z300 - Manual (Page 206)

Installing Software
NetWare 184
Select “Modify,” and replace the driver according to the following
procedure:
1 Move the cursor to “Storage adapters” on the menu shown
above with the arrow keys, and press the <Enter> key.
2 As the following menu appears, delete “ADPT160M” with the
<Del> key
3 Set the floppy disk labeled “MegaRAID Drivers & Utilities for
Series 475/493 NetWare/MS-DOS” (supplied with RAID
Controller) in the floppy disk drive.
4 Press the <Insert> key to select “Add an unlisted driver <Ins>.”
The following drivers were detected for this server.
Add, change,or delete device drivers as needed.
Device types Driver names
Platform Support Module: MPS14
HotPlug Support Module: (optional)
Storage adapters ADPT160M,
IDEATA
options
_Continue
_Modify
Add, edit, or delete storage drivers. Each control-
ler/adapter requires a driver.
Driver name Device name Stat
||ADPT160M.HAM|| Adaptec Ultra160 ASPI & SCSI Module||
||IDETA.HAM || Generic ATA/IDE/ATAPI.Adapter ||
Additional Driver Options
_Return to driver summary
_Modify