TOA Electronics SR-A12SWP - Manual (Page 11)

11
8. DIGITAL PROCESSOR SETTINGS
Recommended setting parameters are as follows.
System using the SR-A12L, SR-A12S, SR-A12LWP or SR-A12SWP
System which combines the SR-A12L or SR-A12S with the SR-A18B
Channel
LOW 0 Normal HPF (12 dB) 40 0.900 0.708
Gain
(dB)
Polarity
Delay
(msec) TYPE Freq.. (Hz)
Filter
Gain (dB) Q
LPF (12 dB) 1.0k 0.707
PEQ 300 2.549
PEQ 530
-5.0
-4.5 2.549
LPF (12 dB) 1.0k 0.707
HIGH 0 Inverse HPF (12 dB) 1.2k 0.707 0
PEQ
14.0k 1.160 PEQ
5.0k 1.414 -2.0
PEQ 2.5k
9.0
-10.0 1.011
Channel
S-LOW 3.0*
* The Gain on the S-LOW channel needs to be adjusted depending on the system configuration.
Inverse LPF (12 dB) 90 0.707 0.708
Gain
(dB)
Polarity
Delay
(msec) TYPE Freq. (Hz)
Filter
Gain (dB) Q
HPF (12 dB) 20 0.707
HPF (12 dB) 35 1.505
PEQ 34.5 6.0 1.800
LPF (12 dB) 200 1.000
LOW 0 Normal HPF (12 dB) 77.5 0.900 0.708
LPF (12 dB) 1.0k 0.707
PEQ 300 2.549 -5.0
PEQ 530 2.549 -4.5
LPF (12 dB) 1.0k 0.707
HIGH 0 Inverse HPF (12 dB) 1.2k 0.707 0
PEQ
14.0k 1.160 PEQ
5.0k 1.414 -2.0
PEQ 2.5k
9.0
-10.0 1.011