TOA Electronics SR-A12SWP - Manual (Page 24)

133-05-383-8A
SR-A18B
Bass-reflex type
Continuous program: 720 W
8
Ω
95 dB (1 W, 1 m)
40 – 400 Hz (when using the optional DP-0206)
80 Hz (when using the optional DP-0206)
46 cm Cone type
M5 Screw terminal, distance between barriers: 12.2 mm
and NEUTRIK NL4MP x 2 (Suitable connector: NEUTRIK NL4FC)
Enclosure: Plywood, black, Urethane paint
Front grille: Punched steel plate, Black, Acrylic paint
740 (w) x 573 (h) x 698 (d) mm
66 kg (including accessories)
Joint plate ...... 2, Joint plate mounting bolt (M10) ..... 16
SR-RF12 SR-RF12WP
Flying: up to 8
Stacking: up to 5.5
Flying: up to 8
(The SR-A18B (optional) is counted as
1.5 pieces)
Steel plate, Black, Paint Stainless steel (SUS304)
728 (w) x 164 (h) x 800(d) mm (excluding the bolt section)
22 kg (including accessories) 22 kg (including accessories)
Plate mounting bolt (M10) ...... 12
Model
Number of
Speakers to be
Mounted
Finish
Dimensions
Weight
Accessories
SR-TP12
When mounted the SR-A18B: 0˚ – 15˚
When mounted the SR-RF12: 10˚ – 15˚
Steel plate, black, paint
3.2 kg
Model
Variable Angle Range
to be Mounted
Finish
Weight
SR-A18B
*The design and specifications are subject to change without notice for improvement.
SR-RF12, SR-RF12WP
*The design and specifications are subject to change without notice for improvement.
SR-TP12
*The design and specifications are subject to change without notice for improvement.
Model
Enclosure
Power Handling
Capacity
Rated Impedance
Sensitivity
Frequency
Response
Crossover
Frequency
Speaker
Component (low)
Input connectors
Finish
Dimensions
Weight
Accessories