TOA Electronics SR-A12SWP - Manual (Page 23)

23
SR-A12L SR-A12S
Bass-reflex type
Continuous program, Low frequency: 450 W, High frequency: 180 W
Low frequency: 8
Ω, High frequency: 16 Ω
Low frequency: 98 dB (1 W, 1 m) Low frequency: 98 dB (1 W, 1 m)
High frequency: 110 dB (1 W, 1 m) High frequency: 109 dB (1 W, 1 m)
50 – 20,000 Hz (when using the optional DP-0206)
1,000 Hz (when using the optional DP-0206)
Horizontal: 90˚, Vertical: 5˚ Horizontal: 90˚, Vertical: 15˚
30 cm Cone type
Wave front control horn 90˚ Wave front control horn 90˚
(horizontal) x 5˚ (vertical) (horizontal) x 15˚ (vertical)
+ Compression driver x 2 + Compression driver x 2
M5 Screw terminal, distance between barriers: 12.2 mm
and NEUTRIK NL4MP x 2 (Suitable connector: NEUTRIK NL4FC)
Enclosure: Plywood, black, Urethane paint
Front grille: Punched steel plate, Black, Acrylic paint
740 (w) x 433 (h) x 469 (d) mm 740 (w) x 433 (h) x 467(d) mm
49 kg (including accessories) 47 kg (including accessories)
Joint plate ...... 2, Joint plate mounting bolt (M10) ...... 16
Model
Enclosure
Power Handling
Capacity
Rated Impedance
Sensitivity
Frequency Response
Crossover Frequency
Coverage Angle
Speaker
Component (low)
Speaker
Component (high)
Input Connector
Finish
Dimensions
Weight
Accessories
SR-A12LWP SR-A12SWP
Bass-reflex type
Continuous program Low frequency: 450 W, High frequency: 180 W
Low frequency: 8
Ω, High frequency: 16 Ω
Low frequency: 98 dB (1 W, 1 m) Low frequency: 98 dB (1 W, 1 m)
High frequency: 110 dB (1 W, 1 m) High frequency: 109 dB (1 W, 1 m)
50 – 20,000 Hz (when using the optional DP-0206)
1,000 Hz (when using the optional DP-0206)
Horizontal: 90˚, Vertical: 5˚ Horizontal: 90˚, Vertical: 15˚
30 cm Cone type
Wave front control horn 90˚ Wave front control horn 90˚
(horizontal) x 5˚ (vertical) (horizontal) x 15˚ (vertical)
+ Compression driver x 2 + Compression driver x 2
Direct cable withdrawal from internal speaker: 8.6 mm,
conductor cross section: 1.25 mm 2 , 4-core cable, 3 m
IPX4
Enclosure: Plywood, black, Urethane paint
Front grille: Punched stainless steel (SUS304), Black, Paint
740 (w) x 433 (h) x 469 (d) mm 740(w) x 433 (h) x 467 (d) mm
(excluding speaker cable) (excluding speaker cable)
51 kg (including accessories) 48 kg (including accessories)
Joint plate ...... 2, Joint plate mounting bolt (M10) ...... 16
Model
Enclosure
Power Handling
Capacity
Rated Impedance
Sensitivity
Frequency Response
Crossover Frequency
Coverage Angle
Speaker
Component (low)
Speaker
Component (high)
Speaker cable
Water Protection
Finish
Dimensions
Weight
Accessories
11. SPECIFICATIONS
SR-A12L, SR-A12S
*The design and specifications are subject to change without notice for improvement.
SR-A12LWP, SR-A12SWP
*The design and specifications are subject to change without notice for improvement.