Toshiba DKT2304-CT - Manual (Page 27)

Installation
Step 4: Connect Telephone Cables
Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones 07/06
17
Step 4: Connect Telephone Cables
Your cordless telephone must be connected to a digital telephone PBX port.
➤ To connect as a stand-alone telephone
➤ Connect the modular jack labeled “Line
In” directly to the telephone wall jack
using one of the supplied cables (shown
at right).
➤ To connect to a Strata DKT
1. Unplug the cable from the DKT and
plug into the “Line In” jack of cordless
telephone base unit (shown at right).
2. Plug the additional two-foot cable into
the “Line Out” jack of the base unit and
into the DKT jack located on the
bottom of the telephone.
WARNING! ➤ Never install telephone wiring during a lightning storm.
➤ Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
➤ Use caution when installing or modifying telephone lines.