Miniplex system components (non-4100u), Overview, The rui card – Tyco 4100U User Manual
Page 60: Transponder cabinets, Miniplex system components (non-4100u) -32, Overview -32, The rui card -32, Transponder cabinets -32, Figure 3-2, The remote unit interface card -32
3-32
The 4100 MINIPLEX system is comprised of a host panel containing everything required
in a standalone cabinet (see Chapter 2), plus:
• An RUI module in the master controller bay
• One or more remote MINIPLEX transponder cabinets
• A RIC II card in each transponder cabinet
This section describes each component in turn.
The RUI module consists of a motherboard and daughter card, which are used in the
master controller bay of a MINIPLEX system to extend the length of communications
wire to reach remote bays.
Figure 3-2. The Remote Unit Interface Card
The RUI card mounts onto a 562-799 or 562-856 Motherboard.
Communication wiring from the RUI module in the host panel extends to the RIC II card
in a remote transponder cabinet.
Continued on next page
MINIPLEX System Components (Non-4100U)
Overview
The RUI Card
Transponder
Cabinets