Top Innovations SP-350 - Manual (Page 9)

Drain the unit by removing the drain plug
(located at the side of the main unit-see
P.4
# 11). This will allow contents of the
reservoir (main unit) to drain. Tipping the
unit in the direction of the drain plug to
remove any remaining water. Replace the
drain plug.
Using distilled water will eliminate a
residue build up usually found in tap water.
CLEANING AND STORING
1 . Turn the ON/OFF switch t o the OFF
position and unplug from the power
source.
2. Wait for the steamer to cool completely
for at least 30 m i n u t e s .
3. Remove and drain the water container.
Drain the unit by removing the drain
plug and allowing the contents of the
reservoir to drain. Tip the unit in the direction
of the drain plug to remove remaining
water. Replace t h e plug.
4. Remove the steamer hose and hanger rod.
5 . Remove the Water T a n k .
6. Remove excess water from the reservoir
by lifting the unit and pouring. Flush the
reservoir area with fresh water to clean
any residue
from the water source.
valve
.
7. Reattach the hose, hanger rod and water
container and store the unit.
P.8