Tascam DA-78HR - Manual (Page 26)

4 - Menu interface, etc.
TASCAM DA-78HR
26
4.11Maintenance menu
MAINTN--
The following menu provides
information relating to maintenance procedures, etc.
4.12Dedicated keys
The following (shifted) keys also allow settings to be
made. These are fully described in the appropriate
sections of the manual:
Display
Values
(*=default)
Described in
version
(version)
SYS (system).*
Frnt (front), Svo
(servo)
11.3, “Checking
version numbers”
System, front panel driver, servo software (firmware) versions
DRUM. TIM
(drum time)
TOTL * (total),
SRCH (search)
11.1.3, “Checking
drum time”
Number of hours the drum has been in use
CLEN.
(cleaning)
OFF * 11.1, “Head and
transport cleaning”
Starts the head cleaning process
B. E. R.
(block error rate)
OFF *, ON 11.1.2, “Checking
error rates”
Displays the current block error rate
init.
(backup memory
initialization)
off * 11.2, “Backup
memory initializa-
tion”
DEVTYPE
(emulated device
type)
DA-78HR *, da-
88 , da-38 , da-
98
7.13, “Emulation”
Key Description Described in
DELAY Individual relative
track delay 7.3, “Track delay”
OFFSET Offset relative to
timecode or abso-
lute times 8.3, “Machine off-
set” and 9.6.2,
“Timecode offset”
PREROLL Locate pre-roll
and auto-punch
pre- and post-roll
times 5.6.4, “Editing the
pre-roll and post-
roll times” and
7.1.3, “Setting the
location pre-roll
time”
PITCH Varispeed
(±6.0%) 7.6, “Vari speed
(pitch control)”
LOC/MEMO 1 Location memory
points 7.1, “Autolocation”
LOC/MEMO 2