7 - advanced operations – Tascam DA-78HR User Manual
Page 46
7 - Advanced operations
TASCAM DA-78HR
46
2
Press the
SHIFT
key so that the
SHIFT
indicator
is flashing, and press the
MENU
key until the
display shows
system-- (
SYSTEM--
).
3
Press the
SUB MENU
key until the display
shows
Load. OFF (
LOAD OFF
).
4
Press the ▲ key to make the DA-78HR ready
for loading the settings. The display will show
READY (
READY
).
5
Press the ▲ key again to actually start the
restore operation.
The DA-78HR will automatically search to the
position on the tape where the data has been
saved, and will read the data, loading it into
memory. While the data is being read from
tape, the display shows
READING
(
READING
).
6
If the settings data on the tape has been read
successfully, the display will show
READ OK
(
READ OK
). The unit will then re-start, as if
power had just been turned on.
If there is no tape inserted (or the tape has not been
formatted) when the load operation is readied, the
display shows
no TAPE (
NO TAPE
).
If the tape is not stopped when the load operation is
readied, the display shows
not stop (
NOT
STOP
).
If no data can be located on the tape, the display will
show
NO DATA (
NO DATA
).
If an error is encountered while the reading is taking
place, the display will show
READ ERR (
READ
ERR
).