Toshiba E-STUDIO 210C - Manual (Page 118)

1
2
3
4
5
6
7
8
9
10
11
12
6-26
USING THE SPECIAL FUNCTIONS
7 Key in a new upper limit number of copies (7 digits)
you want to set with the digital keys, and then press
the SET key.
- Press the DISABLE key if the limitation is not necessary,
then press the SET key.
Deleting an Access Code
4 To delete all the registered access codes, press the
ALL key, then the SET key.
If you want to delete a specific access code, key in
the access code (5 digits) of the department to be
deleted with the digital keys, then press the SET
key.
5 Press the YES key.
10. DEPARTMENT MANAGEMENT (Cont.)
Setting Access Codes (Registration/Change/Deletion) (Cont.)
l When the ID CHANGE key is selected in step 5:
6 Using the digital keys, enter a new access code (5
digits) into the fields of NEW ACCESS CODE and
CONFIRM ACCESS CODE, and press the SET key.
- You cannot enter an access code which has already been
registered. The administrator password and ‘00000’ are in-
valid.
l When the LIMITATION key is selected in step 5: