Toshiba E-STUDIO 210C - Manual (Page 42)

1
2
3
4
5
6
7
8
9
10
11
12
2-16
HOW TO MAKE COPIES
After the copying has been finished, press the PRINTER/
NETWORK key on the control panel. The printing mode will
be resumed.
2 Press the COPY JOB REQUEST key during print-
ing.
- The screen on the right appears during printing. If you
press the COPY JOB REQUEST key, preset copying be-
comes available when the current printing job is completed.
When the copier is being used as a printer (optional), you can interrupt it and make copies after the
current printing job is completed.
During Printing (optional)
4. AUTO JOB START (JOB PRESET) (Cont.)
1 Place the original(s). Page 2-9
3 Select copy modes as required and press the
START key.