Simple troubleshooting – Toshiba E-STUDIO 210C User Manual

Page 176

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

12

10-4

MAINTENANCE

Is the copier in the energy saving

mode (Automatic Energy Saving

mode)?

Is the access code keyed in? Is

the access code correct?

Is a key copy counter (optional)

used?

Is the “Warming up” message

displayed?

Does the administrator password

input screen appear?

Is interrupt copying set?

Reference page

Page 1-2, 9-4

Page 9-13

Items to be checked

Is the power cord plug firmly in-

serted in the outlet?

Are the front covers(left and

right), the exit cover and the

large-capacity feeder (optional)

firmly closed?

Is the bypass guide firmly

closed?

2. SIMPLE TROUBLESHOOTING

Check the following items, and if the problem still occurs, call service for assistance.

Copier does not start

Countermeasure

Insert the power cord plug firmly.

Close the covers properly.

Close the bypass guide unit properly.

Display does not change when keys or icons are pressed

Press the

ENERGY SAVER or

START

key on the control panel to clear the mode. (It

takes a while for the copier to become ready.)

Key in the correct access code.

* If the access code is not clear, ask your copier

manager.

If you are using a key copy counter, insert it

into the slot.

Wait until the copier becomes ready.

The administrator password is required. Ask

your copier manager.

Press the

INTERRUPT key on the control

panel to clear the mode.

Page 1-4, 6-31

Page 1-9

Page 1-10

Page 1-8

Page 6-22

Page 2-17

Advertising