Toshiba SD-37VBSB - Manual (Page 19)

19
VCR
VCR
VCR
Loading and unloading a cassette tape
Erase prevention tab
Screwdriver
Adhesive tape
Erase prevention tab
1 2
Use only video cassette tapes marked .
Loading
Push the center of the tape until it is automatically
inserted. Insert the cassette tape with its labeled side facing up and
the erase prevention tab positioned at your left. An in-
verted cassette tape cannot be inserted.
Automatic power ON
When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
Press EJECT on the DVD/VCR. Even if a tape
is being played, press this button only once. Remove the cassette tape.
Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning,
the cassette tape will be ejected automatically.
To prevent accidental erasure
Remove the erase prevention tab with a screw-
driver.
To record again
Cover the hole with a piece of adhesive tape.
2J50101A [EN] P18-19 27/2/06, 5:39 PM 19