Toshiba SD-37VBSB - Manual (Page 41)

41
Changing soundtrack language
You can select the language when you play a multilingual disc.
1
2
Press AUDIO during playback.
The current soundtrack language
will appear.
Changing soundtrack language/Setting surround sound
Notes:
• If the desired language is not heard after pressing
the button several times, the language is not
recorded on the disc.
• The selected soundtrack language is canceled when
you open the disc tray. The initial default language or
available language will be heard if the disc is played
back again.
In case of Video CD playback
Audio type changes as follows each time you press
AUDIO.
Press AUDIO repeatedly until the desired lan-
guage is selected.
• The on screen display will disappear after a few
seconds.
Press B or A to select “On”.
• The on screen display will disappear after a few
seconds.
1
Setting surround sound
This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert
hall.
2
To cancel Surround mode:
Follow the left steps 1~2, then press B or A to select
the “Off” position.
Notes:
• The “QSound” is effective only for the sound of disc.
• The QSound setting can also be changed in the
function setting (see page 52)
• This function works only when the disc recorded with
Dolby Digital is played back.
• When this function works, the volume might
changed.
• When the voice is distorted, turn off QSound.
During disc playback press AUDIO.
Manufactured under license from QSound Labs,
Inc. U.S. patent Nos. 5,105,462, 5,208,860 and
5,440,638 and various foreign counterpart.
Copyright QSound Labs, Inc. 1998-2002.
QXpander
™ is a trademark of QSound Labs, Inc.
All rights reserved.
1/2 Eng Dolby Digital
2/2 Fre Dolby Digital
QSound Off
QSound On
LR L R
2J50101A [EN] P41-48 27/2/06, 5:40 PM 41