Toshiba SD-37VBSB - Manual (Page 31)

31
Stereo recording and playback
Playback
Use AUDIO SELECT to select under stereo/mono or bilingual
playback. See the table below for more information.
Bilingual playback
performed as follows: On-screen indications
(for 4 sec.) Stereo playback
performed in:
Simultaneously
both languages
from Hi-Fi track
(Mixed sounds)
Original sound
track (Sub sound)
One's mother
tongue dubbing
(Main sound)
One's mother
tongue dubbing
(Main sound)
Stereo
Mono
Right channel
signal output from
both loudspeakers
Left channel signal
output from both
loudspeakers
Note:
When playing Hi-Fi cassette tapes re-
corded on another VCR, the sound out-
put may be distorted. This is normal and
no indication of a unit malfunction. Try to
minimize sound distortions by using
SET +/– or change to MONO by pressing
AUDIO SELECT.
L CH
R CH
MONO
STEREO
HiFi signal indication
It will be displayed for approx. 4
seconds when playing HiFi video
cassette tapes.
HI-FI
2J50101A [EN] P25-32 27/2/06, 5:40 PM 31