Perreaux Headphone Amplifier Silhouette SXH2 - Manual (Page 19)

18
10 10 10 10 Troubleshooting Guide
Please use this guide if you are experiencing any problems with
the SXH2 in your system. It will provide possible solutions for
some given symptoms.
There is no
output from
my system
SXH2 not turned on
Make sure the SXH2 power switch is in the DOWN position.
AC cord not plugged in
Check that the AC cord is plugged into the IEC socket on the rear
of the SXH2.
Mains power not turned on
Check if the power is turn on at the mains socket on the wall.
Interconnect cables not connected
Make sure that the input and output interconnect cables are
plugged in and are connected to the respective RCA sockets on
the rear of the SXH2.
Source not turned on
Check that your source component is plugged in to the mains and
the power is turned on.
Source not set to play
Ensure that your source component is playing the recording you
would like to listen to, and that pause is not pressed.
No volume setting
Make sure that the volume on your SXH2 is set to a suitable
level.
SXH2 set to incorrect input
Confirm that the input on your SXH2 is connected to the
appropriate source output.
Headphones not connected
Check that your headphones are firmly inserted into the jacks on
the front of the SXH2.