Plu verifying label, 5 plu verifying label – Toshiba TEC H-9000 User Manual
Page 34
9.
PROGRAMMING PROCEDURES
9.5 PLU VERIFYING LABEL
9- 12
9.5
PLU VERIFYING LABEL
Menu Page: 1
Item No.:
4
Verifies PLU data stored in the scale.
NOTES:
1. Labels are printed in both batch mode and on-demand mode.
2. When no PLU is stored in the selected range, an error occurs when the
key is
pressed.
3. Pressing the
key releases the scale from the error mode and returns to the
initial status of this menu.
4. After clearing a paper jam error, the scale will wait for an entry of PLU# again.
ENTER
g
4
g
<MENU>
Page 1
1
0
0
1
1
0
0
NEXT
PLU
1
0
8
ENTER
The
confirmation
label is issued.
Set the entire PLU#.
Set the individual PLU#. (Ex. PLU #100)
Set the block PLU#. (Ex. PLU #100
199)
Set the zone PLU#. (Ex. PLU #100
108)
CLEAR
ENTER
PROG.
ESC.
To interrupt
label issue.
To resume label issue
which has been interrupted.
<MENU>
Page 1
Main
<MENU>
CLEAR